Medline Optifoam Adhesive 4 x 4 | ConceptASR

Medline Optifoam Adhesive 4 x 4 Foam Wound Dressing

The Medline Optifoam Adhesive 4 x 4 is a medical-grade bordered foam dressing designed to help manage moderate to heavily draining wounds. Its absorbent foam pad captures and retains wound exudate while providing protection and soft cushioning over the wound area.

An integrated adhesive border helps keep the dressing positioned without requiring a separate fixation product in many routine applications. The 4 x 4 in overall format contains a 2.5 x 2.5 in absorbent pad, providing a surrounding adhesive area for secure placement.

Highly absorbent foam pad

The absorbent foam construction is designed to manage moderate to heavy wound drainage. Effective fluid management can help reduce excess moisture around the wound while supporting an appropriate wound-care environment.

The foam pad also provides soft cushioning to help protect the covered wound from minor external pressure, shear and friction. Medline describes the dressing as highly absorbent, which may help reduce the frequency of dressing changes when clinically appropriate.

Dressing replacement frequency must still be determined according to the wound condition, level of drainage, professional assessment and manufacturer’s instructions.

Integrated adhesive border

The built-in adhesive border simplifies dressing placement and fixation. It helps keep the absorbent pad positioned over the selected wound area and may eliminate the need for a separate retention bandage or dressing tape.

Before applying the Medline Optifoam Adhesive 4 x 4, the surrounding skin should be assessed and prepared according to the applicable wound-care protocol. The adhesive border should be applied to clean, dry and intact surrounding skin when appropriate.

The adhesive version may be especially convenient when:

• Integrated fixation is preferred
• A separate retention product is unnecessary
• The surrounding skin can safely tolerate an adhesive border
• A low-profile bordered dressing is desired
• Secure and convenient placement is required

Waterproof outer layer

The waterproof outer layer helps protect the covered wound area from external moisture and contaminants. Medline states that the outer layer also helps prevent strike-through and resist border roll-up, supporting longer and more dependable wear.

Although the outer surface provides waterproof protection, the dressing must still be inspected regularly. It should be replaced when clinically indicated, when drainage approaches the dressing’s capacity or when the seal and positioning are no longer appropriate.

Low-profile and conformable design

The dressing has a low-profile construction that is flexible, conformable and comfortable. This allows it to adapt to different areas of the body while limiting unnecessary bulk.

Its bordered square format provides a practical combination of absorbency, cushioning and secure fixation. The absorbent pad remains centred over the wound while the surrounding border helps stabilize the dressing.

Wound-care applications

According to Medline, Optifoam Adhesive may be used as a primary or secondary dressing for partial- and full-thickness wounds with moderate to heavy drainage.

Depending on the complete wound assessment and clinical protocol, it may be considered for:

• Pressure injuries
• Lacerations and abrasions
• Skin tears
• Partial-thickness wounds
• Full-thickness wounds
• Leg ulcers
• First- and second-degree burns
• Other draining wounds considered appropriate by a healthcare professional

Product selection should not be based solely on wound type. Wound depth, drainage level, surrounding skin, infection risk and the patient’s overall condition must also be evaluated.

Professional healthcare settings

The Medline Optifoam Adhesive 4 x 4 may be used in:

• Hospitals and medical clinics
• Long-term care facilities
• Residential care settings
• Specialized wound-care clinics
• Podiatry and foot-care clinics
• Community nursing programs
• Home healthcare services

Product specifications

• Brand: Medline
• Product family: Optifoam®
• Product type: Adhesive bordered foam wound dressing
• Manufacturer reference: MSC1044EP
• Overall size: 4 x 4 in
• Metric size: 10 x 10 cm
• Absorbent pad size: 2.5 x 2.5 in
• Drainage level: Moderate to heavy
• Outer layer: Waterproof
• Adhesive border: Yes
• Sterile: Yes
• Packaging: Box of 10 dressings
• Case quantity: 100 dressings
• Manufacturer: Medline Industries LP
• Sold by ConceptASR: Box of 10

Medline indicates a maximum wear time of up to seven days. Actual wear time and replacement frequency must be based on the wound condition, exudate level, professional judgment and the manufacturer’s instructions. Official Medline product information

Always consult the packaging and instructions for use for complete indications, contraindications, warnings and application information.